Longacre 78280 No Sweep C_C Gauge - P_N User Manual

Browse online or download User Manual for For the car Longacre 78280 No Sweep C_C Gauge - P_N. Longacre 78280 No Sweep C_C Gauge - P_N User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 1
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Longacre Racing Products, Inc.
www.longacreracing.com
Instructions For “No-Sweep™”
Caster/Camber Gauge for “
Wide 5
” and
Tubular 5 on 5
” Spindles, 1-13/16” Thread
Use of this gauge requires a spindle adaptor. See #78402 Kit.
Contact your local dealer or
Longacre
.
If you have already modified your spindle to use a previously built
“No-Sweep” gauge you will not need this Spindle Adaptor.
• Find a flat, level place to set your front end. Front wheels must be pointed
straight ahead. This is very important.
• Remove the dust cap and thread the black adaptor onto the spindle.
The indexing bar inside the adaptor will engage with the notch in the spindle adaptor (see
Spindle Adaptor above).
• Read the CAMBER directly on one of the two vials on either side of the
gauge. Note that they are marked + and -. Read the line nearest to the
center of the bubble. Each line is 1/4
O
.
• Read CASTER directly as above. Note the vial is marked + and - caster.
Read the line nearest to the center of the bubble. Each line is 1/2
O
.
With the “
No Sweep™
” gauge it is not necessary to turn the wheels 20
O
in each direction.
• Make adjustments as needed, shake the car up and down and roll the car
back, then forward again. Recheck readings.
NOTE: Adjusting the caster may have an effect on the camber and
vice versa. Double check all your settings before finishing. Be sure
to tighten all suspension bolts when done.
Warning:
Do Not leave the gauge in the hot sunlite or store in a
place over 120
O
F. Breakage of the vials could occur.
If this does happen replacement is simple and easy with no loss of accuracy.
Replacement vials can be ordered from any authorized dealer or the factory.
2/05
Page view 0
1

Summary of Contents

Page 1 - Warning:

Longacre Racing Products, Inc.www.longacreracing.comInstructions For “No-Sweep™”Caster/Camber Gauge for “Wide 5” and“Tubular 5 on 5” Spindles, 1-13/16

Comments to this Manuals

No comments